Wednesday, October 24, 2012

My Delta Elite

So in my return from the hinterlands of elk hunting, I was catching up on my reading and saw that Rob Allen had finished his write-up on the Colt Delta Elite.  Good read, and very informative.
I was tempted to respond to both the article on Gun Nuts and his site, but I think I'm going to do it here.


I went about my thing with the 10mm 180 degrees different than he did.  My first 10 was the Delta Elite.

It started out kind of by accident.  3 yrs ago this month, I was looking for a 1911 in a different caliber.  One day, while perusing Gun Broker, I happened across an auction for LNIB Colt Delta Elite 10mm 1911 for the unheard of asking price of $800.  The pistol itself was one of the early ones (low 4-digit DE serial number and all) and came with the old Colt cardboard box instead of the new plastic ones.  So I snatched it up and went about making it comfy for me to use.

What I did was replace the trigger, main spring housing, fire control group, barrel, grip safety, operating rod/spring, and manual safety.  With the exception of the barrel (Clarks Custom), grips (Night Hawk), and trigger (STI), I used Ed Brown parts.

Some would ask why?  Well, being a southpaw, the single manual safety doesn't work for me.  At all.  I have to use an ambi-safety.  Everything else was creature comfort on my part.  Since I shoot with such a high grip, I had to replace the original grip safety with something that wouldn't bite me.  And as Rob pointed out in his review, the stock trigger ain't nothing to write home about.

The barrel was replaced with a Clarks Custom match barrel due to the fact the factory one wouldn't feed hollow points worth a hoot. That, and I tried to make it work and screwed it up. 

Of all the mods I made to this pistol, the only thing I had to send it out for was the barrel.  Everything else you see was done by me, including mounting the beavertail grip safety.

One side note of interest here.  When it was all said and done, I got really good at taking apart a Series 80 pistol and putting it back together again.  When I started, it would take me about 45 minutes to take it down and back.  When I finished, matter of a couple of minutes.  What would always trip me up was the firing pin safety parts in the frame. Gad, what a PITA.

Catching Up

Sorry for the hiatus, I've been down in south central WY attepmting to deplete the population of waputi down there.  (And having zero luck at it, I might add.)

So I get back to civilization last night and set about catching up on all the goings on since I left weekend before last.

The little bit of news I got via satellite radio mentioned some loser walking through a piece of paper and taking out the source of his affection and two other folks in a spa in WI, then saving the taxpayers the hassle of putting his stupid behind on trial by introducing his own gray matter to the outside world.

This has raised howls from the civil rights revocation groups to Do Something.  I'm not sure what they're proposing would have solved anything, but hey.  Like Uncle says, gun control is what you do instead of something.

I also got to listen to the second debacle.  Lot of back and forth, but the one thing that made me stand there slack-jawed and bug-eyed was when Mittens Romney dropped Fast and Furious during the discussion about 'gun control' or as it was supposed to be about, scary looking semi-auto weapons that look scary.

Not in a million years would I have thought something as testy and oft-reported on (NOT!) would find its way into the debate.  Too bad it didn't come up in the third one. I would've loved to have seen Dear Leader try to essplain that one away.  Of course what can he say?  He invoked executive priviledge.  Still, it would've been fun to see.